fa-IRen-US
  • DESIGN, CONSTRUCTION AND INSTALLATION OF OIL, GAS, REFINING AND PETROCHEMICAL PROCESS EQUIPMENT.

    slide one
  • ABLE TO BUILD AND DESIGN CUSTOM PROJECTS IN THE FIELD OF OIL, GAS, REFINING AND PETROCHEMICAL, WITH A MINIMUM TIME AND A CAPACITY OF 1200 TONS PER YEAR

    slide two
News
Azar Energy Tabriz

Azar Energy Co. is a manufacturer of Oil, gas, refining and petrochemical equipment. The company specializes in the design as well as manufacturing, production and installation thanks to its experienced and professional personnel, modern machinery.

With 30 years in the business and hundreds of completed projects we have grown to become a national leader in the oil industry.

 Parallel to its regular activities as a manufacturer, Azar Energy has successfully established its research and development center and followingly invented a special type of tray registered by Iran Industrial Property General Office at 14 February 2005 which shows better results due to its high efficiency in comparison with the foreign samples. The invented tray has successfully reduced H2S content of the crude oil from 3800 ppm to 40 ppm at West Oil & Gas Production co. (WOGPC) Dehloran site and Tabriz petrochemical co. where it has been installed for the first time and is still under service showing best quality, highest efficiency and lowest pollution.

Our aim is to produce high quality products complying with the international standards and feasible price along with continuous improvement in quality of the products to achieve customer satisfaction

 

Latest Products
ITEM ID: 327  |   COMMENTS: 0   |   VIEWS: 1341   |  

 

Plate Pack Liquid Liquid Coalescer


Plate pack Liquid-Liquid coalesce is one of the most widely used separators in oil, gas and petrochemical industry. These type of separators are consisting of sloped parallel plates with the same interval. This type of internals leads to increased efficiency of Liquid-Liquid gravity separators. These plates provide the condition for droplets of dispersed phase to place on the plates and coalesce with each other and form larger droplets and to be easily separated from continues phase. The slope of plates causes the phase to move toward the boundary between them. The flow regime between plates is necessarily laminar to provide good separation. The slope and distance between plates is determined by their design. Usually, the angle of sloped plates is 45 to 60 degrees and their spacing can vary from 10 to 100 mm.            

Share نسخه مخصوص چاپ

Research and Developments

Innovations


Name
Last Name
E-Mail

Save Information


 
 
 
Register Forgot Password ?